|
|
|
|
|---|
Heavy duty replacement rectifier board for early Bally and Stern pinball machines. Replaces Bally AS-2518-18, AS-2518-49 and equivalent Stern boards.
Features of the GPE replacement Rectifier Board:
Drop in replacment for existing Rectifier boards.
Note -- not all machines are fused the same. Refer to your game's manual for proper fusing.
Works in all of the following Bally games:
Freedom, Night Rider, Evel Knievel, Eight Ball, Power Play, Mata Hari, Strikes and Spares, Black Jack, Lost World, Six Million Dollar Man, Playboy, Voltan, Supersonic, Star Trek, Paragon, Harlem Globetrotters, Dolly Parton, KISS, Future Spa, Space Invaders, Nitro Groundshaker, Silverball Mania, Rolling Stones, Mystic, Hotdoggin', Viking, Skateball, Frontier
Also works in all of the follow Stern games:
Lectronamo, Wildfyre, Nugent, Dracula, Trident, Hot Hand, magic, Meteor, Galaxy, Ali, Big Game, Seawitch, Cheetah, Quicksilver, Stargazer, Nineball, Iron Maiden, Viper, Dragonfist, Flight 2000, Free Fall, Lightning, Split Second, Catacomb, Orbitor One
Replaced undersized bridge rectifiers with 35 amp, top mounted bridge rectifiers.
Printed circuit board comprised of heavy duty 4 ounce copper construction.
All traces exceed the current handling capability as defined in ANSI/IPC-D-275.
Extensive use of ground and power planes to maximize current carrying capacity and heat dissipation.
All high current connector contact positions have traces to bottom of board -- This means no high current contacts rely on the connector's plated through holes! This was a common cause of failures on the original rectifier boards.
Uses high quality tin plated berylium copper fuse holders for low current fuses, silver plated berylium copper fuse holders for high current fuses.
Covered fuse area for safety concerns. Cover easily removed from friction fit mounts. Cover is made from clear, flame retardent Makrolon sheet (same material used on fire fighter masks). Clear cover is barely noticeable in above picture.
High power dissipating extruded heat sinks on BR1 AND BR2. Extruded heat sink results in better heat dissipation and a better looking product.
Heat reduction measures have been taken to reduce the temperature of R1 and R2 power resistors. Typically, R1 on this board operates at 14F cooler and R2 operates at 28F cooler. NOTE - these resistors still operate at a highly elevated temperature.
Solder mask over bare copper (SMOBC) circuit board construction -- no bubbling of solder mask during soldering process while attaching transformer wires.
Ground terminal screw connection provided for optional high current ground connection.
lakeside@moneymachines.com
Lakeside Distributors
We accept secure online credit card payments via Verisign Payment Services