Replacement pinball coil stops, sleeves and accessories for all manufacturers of pinball machines. Pinball machine coil stops, coil sleeves and flipper plungers receive alot of wear and tear on the pinball machine and are the leading cause of flipper sticking on a pinball machine. The flipper plunger is constantly hitting the top of the coil stop causing it and the plunger to flatten and mushroom out of shape. This wear eventually causes the flipper plunger to stick and not move smoothly. Also coil sleeves receive the same heavy wear except that it is the constant sliding of the flipper plunger within the coil sleeve wears uneven areas within it causing the same flipper sticking symptom.
Universal stop made to replace worn stops on your old stop bracket. 5/16" in diameter and 5/16 long. 10/32 thread with lock nut. Easy bolt on installation. Reference #GTB-A4862
Williams & Bally back stops. 7/8" or 22mm center to center mounting holes. Most commonly used backstop for newer Bally & Williams pinballs. ref # A10821 and A12111.
Williams coil mounting bracket. Ref # 01-7695.
Bally & Data East flipper coil stop for all Bally pinballs from 1968 to 1987. 9/16" center to center mounting holes and 5/16" hole plug. Reference: A-365-00024-0000, A-613-67, A-613-115, A-613-127, 515-5086-00.
Williams/Bally coil stop with 3/8" center to center mounting holes and 5/16" hole plug. Ref # A8038/A7414/A8143
Williams/Bally good used coil stop with 3/8" center to center mounting holes and 5/16" hole plug. Ref # A8038/A7414/A8143
Williams extra strong coil stop. 7/8" or 22mm center to center mounting holes, fits newer Williams ref # A10280.
Data East coil backstops. 7/8" or 22mm center to center mounting holes with large 6mm mounting holes. Heavy duty coil stop.
Gottlieb coil back stop assembly, 13 /16" or 20mm center to center mounting holes, for electronic machines. Reference: GTB-A17908