Pinball machine optocouplers, transistors, capacitors, bridges, battery holders and other electronic parts for Williams, Bally, Gottlieb and other pinball machines.
Optical assembly switch gate transmitter for all Williams and Bally pinballs. Ref # A-16908.
Optical assembly switch gate receiver for all Williams and Bally pinballs. Ref # A-16909.
Pair of Williams transmitter and receiver leds. One is a opto emitter and the other is the opto receiver. Sold as a pair. Ref # A-16908, Ref # A-16909.
Pinball optocoupler for drop target assembly: C11212-2, C11223-X, and C11546 on Williams pinball machines. Reference number 5490-10159-00.
Pinball optocoupler for opto boards on Williams pinball machines. Reference number 5490-12451-00.
Pinball optocoupler for flipper boards on Williams pinball machines. This is a 5 legged opto, Reference number 5490-14575-00.
Tip 122 transistor used in early Bally pinballs and many others. Replaces tip 120, tip121 and 9302.
Tip 32C transistor used in Williams, Bally pinballs and many others. PNP General Purpose Power 100 Volt, 3 Amp, TO-220.
Tip 36C transistor used in Williams, Bally pinballs and many others. 100v, 25a, PNP general purpose power transistor.
High current bridge rectifier #MBR506W used on many pinballs and video games. Has wire legs and can handle 50 to 1000 volts and 50 amps.
15,000 mf @ 35 volt capacitor for Bally and other pinball high voltage power supplies.
110 volt male plug for all video games. Easy replacement.
Replacement 10 foot power cord for all games. Heavy gauge wire with male plug on one end and a computer plug on the other. Computer plug can be cut off for hard wiring into your application.
Line filter for all pinball machines. 6 amp capacity.
Battery box or holder for older electronic pinballs using replaceable AA alkaline batteries.
Pinball Repair Video Demonstration on how to relocate the battery holder on Williams and other pinball machines to prevent battery acid damage to cpu boards.
Black plastic battery box or holder for newer electronic pinballs using replaceable AA alkaline batteries.
3 cell 3.6 volt AA type rechargeable Ni-MH battery used in older Bally pinball machines and others with charging circuit.
3 volt Lithium battery and holder used on Gottlieb system 3, 1990 and newer pinball machines. Holder allows easy replacement of battery in the future.
3.6 volt Lithium battery and holder used on many touchscreen countertop games including JVL and others. Also used on other video arcade games.
3 cell 3.6 volt rectangular shaped rechargeable nicad battery used in older Gottlieb pinball machines.
Blow Off contact cleaner spray. 11 ounce bottle used to clean, degrease printed circuit boards, tape drives, tuners and other precision instruments. Dries quickly, leaves no residue and is safe on plastics.