Playfield Post, Steel & Plastic Parts For Pinball Machines
Pinball machine playfield post and plastic parts for Bally, Williams, Gottlieb and other brands of pinball machines. Included are steel post, plastic post, rubber sleeves, post rubbers and other plastic playfield parts.
Plastic facetted 1" pinball post available in transparent red or amber.
Plastic red facetted 1 3/16" pinball post.
Plastic clear double pinball post used on Gottlieb and other pinballs.
Mini rubber post used on Williams pinballs. Use with mini post rubbers.
White split post top used on some Gottlieb pinballs.
6-32 blind nut for attaching post studs to playfield.
Steel double threaded post stud. Has 6-32 threaded bottom and 6-32 threaded top to take nylon nut or rubber caps. Use with plastic post above and nylon caps sold below.
Steel post for rubber caps. Has 6-32 threaded bottom and smooth or knurled top to take rubber caps. Use with plastic post above and rubber caps sold below.
Steel post stud. Has wood screw bottom and 6-32 threaded top to take threaded nut caps. Use with plastic post above and nylon caps sold below.
Steel post stud for all pinballs. Has wood screw bottom and knurled top to take rubber caps. Use plastic post above and rubber caps sold below.
Steel post stud with 5/8" long 8/32" mounting stud and 6/32" top stud. Reference Williams 02-4254
Rubber Post Caps for all early electronic machines. Used to hold playfield plastics down in place. Use with post studs sold above.
White nylon cap nuts as used on many pinballs. Used to hold playfield plastics down in place.
Steel tube rubber post has 1" long 10-32 threaded base and inside threaded top to accept a 6-32 screw. Uses rubber tube bumper sold below. Reference 530-5332-01
Steel rubber sleeve post has 7/8" long 10-32 threaded base and 3/8" long 6/32" threaded top to accept a 6/32 nut. Uses rubber tube bumper sold below. Reference 530-5007-00
Steel rubber sleeve post has 1/2" long 10-32 threaded base and 1/2" long 6/32" threaded top to accept a 6/32 nut. Uses rubber tube bumper sold below. Reference 530-5007-00
Black rubber sleeves for steel post. Available in long and short sizes. The long size is 1" long with a 1/4" inside hole and 7/16" outside diameter. The short size is 7/8" long with a 1/4" inside hole and 1/2" outside diameter.
Yellow sleeves are 7/8" long 1/4" inside hole. Fits on steel rubber sleeve post.
Machine threaded #8-32 mini-ring post studs. 8-32 thread stud has a 3/4" long mounting stud, 1 3/4" overall length. Reference # 02-4177-1. Use with mini rubber rings sold below.
Machine threaded 10-32 mini-ring post studs. Heavy duty 10-32 thread stud has a 7/8" long mounting stud, 1 7/8" overall length. Reference # 03-4660. Use with mini rubber rings sold below.
Wood screw mini-ring post studs. Use with mini rubber rings sold below.
White mini post rubbers for all machines. Available in 3/8" and 7/16" sizes. Fit on mini post studs above.
Black 3/8 inch mini post rubbers for all machines. Fit on mini post studs above.
Black Top Hat Shaped Rubber Post Ends used on Williams.
PinGuard Ball Shooter Lane Kick-out Protector Kit. This stainless steel shooter lane protector will keep the wood on the right side of your shooter lane from becoming damaged from ball kick-outs from the ball trough.
Kit comes complete with: Stainless steel protector, Mounting hardware (not shown) and Installation instructions (not shown). For Stern and other pinball machines. Sega/Stern reference #535-4000-00.
White mini roll over aprons. 2 inches between posts.
Yellow Mini roll over aprons. 1 1/2 inches between posts.
Plastic ball hole switch assembly for Gottlieb pinball machines.
Plastic ball eject hole shield for Williams pinballs ref #3B7351-1. Can also be used with Gottlieb by cutting the left top corner and redrilling on mounting hole.
Star roll over assembly used on Williams, Gottlieb and Bally pinballs. Includes red housing and white star insert.
Black rubber pad with self adhesive back used on Williams pinballs to cushion ball impact on wire ramp ends.