|All Pinball Parts||Pinball MPU Boards||Pinball Driver Boards||Pinball Connectors, Pins and Fuses|
Replacement pinball power supplies for sale for Bally, Stern, Williams and Gottlieb pinball machines. These electronic boards allow the novice to simply swap and exchange their old damaged and non-working boards with these new updated mpu, solenoid driver boards and power supplies. They have all been redesigned to work more efficient and with greater reliability than the originals. We have found that when the pinball mpu/cpu boards have had battery acid leakage on them, it makes better sense to replace them with new replacements.
Replacement Bally pinball machine power supply and rectifier boards for sale. New power supply boards for all early electronic Bally and Stern pinball machines. Replaces old and non working original power rectifier boards. These heavy duty power supplies feature an all new design and construction that includes heavy duty components for long lasting reliable performance.
BPS018 - Voltage rectifier board used in most early solid state Bally and Stern pinball machines. See game listing below to see which games this supply supports.
This board is a direct replacement for the original OEM rectifier board.
The original power supply that this board replaces is Bally part numbers: AS-2518-18 & AS-2518-49
- Larger, beefier bridge rectifiers for longer term operation.
- 100% Through-hole components for future serviceability.
- 100% Off the shelf commercially available parts (no custom parts).
- Test points added to check all incoming and outgoing voltages.
- All new (not 20+ year old) components and PCB.
Note: Please Read
Warnings: This board contains hazardous voltages. Never touch components on board with machine plugged in! This board includes parts that normally operate at high temperatures (roughly 200F). Never touch board until components have cooled off!
This circuit board requires desoldering wires from the old board and then resoldering the wires onto the new board! You need to take extreme care to track which-wire-goes-where. We DO NOT recommend that anyone but the most advanced repair technician try to use this board!
Note -- not all machines are fused the same. Refer to your game's manual for proper fusing.
Games supported by the Bally Rectifier Board: Bally: Freedom, Night Rider, Evel Knievel, Eight Ball, Power Play, Mata Hari, Strikes and Spares, Black Jack, Lost World, Six Million Dollar Man, Playboy, Voltan, Supersonic, Star Trek, Paragon, Harlem Globetrotters, Dolly Parton, KISS, Future Spa, Space Invaders, Nitro Groundshaker, Silverball Mania, Rolling Stones, Mystic, Hotdoggin', Viking, Skateball, Frontier
Stern (A-430): Stingray, Stars, Memory Lane, Lectronamo, Wildfyre, Nugent, Dracula, Pinball, Trident, Hot Hand, magic, Meteor, Galaxy, Ali, Big Game, Seawitch, Cheetah, Quicksilver, Stargazer, Nineball, Iron Maiden, Viper, Dragonfist, Flight 2000, Free Fall, Lightning, Split Second, Catacomb, Orbitor One
Apollo 13, Godzilla, Goldeneye, Harley Davidson, Independence Day, Lost In Space, Mary Shelley's Frankenstein, South Park, Space Jam, Star Wars Trilogy, Starship Troopers, The Lost World Jurassic Park, The X Files, Twister, Viper Night Drivin', Elvis, Grand Prix, NASCAR, Ripley's Believe it or Not, The Lord of the Rings, Monopoly, Playboy, RollerCoaster Tycoon, Austin Powers, Sharkey's Shootout, Striker Extreme, Terminator 3, Simpson's Pinball Party, Mini-Viper, 24, Batman, Big Buck Hunter Pro, Spider-Man, Black Spider-Man, CSI, Family Guy, Indiana Jones, Iron Man, Avatar, Avatar LE, NBA, Pirates of the Caribbean, Shrek, The Rolling Stones, Wheel of Fortune, World Poker Tour
Plug & Play installation for installation by novices and experts alike.
Professionally assembled in USA for top quality.
2 Year Manufacturers Warranty against all manufacturing defects.
Installation Time: About 20 minutes.
Tools Required: 1/4" Nut-driver, Phillips screwdriver.
1. Unplug the AC power from your pinball machine. Remove game backglass.
Open back box.
2. Remove existing power supply.
3. Install provided fuse.
4. Install the XP-SGHV into the back box.
5. Connect all connectors as indicated.
6. Double-check all connections, plug in the machine, and turn the game on. The LEDs will light up.
7. PLAY PINBALL! You'll enjoy your XPin products for years to come!
|Site Map||Order Information||Contact Us||About Us||Privacy Statement||View Cart|